Hevelslot voor smalle behuizing-/frameruimte, polyamide GF zilvergrijs metallic; 1390-U1-CX
for locking sets with profile half cylinder, round cylinder and inserts
Voordelen van het product:
- Bi-directional lifthandle Variable positioning of the rods depending on hinge fixing Small cut out due to outside handle mechanism Innovative new and well-priced technology Attractive design Larger clearance due to narrow bending 33 x 25 mm or 37 x 25 mm Patented
- Variable positioning of the rods depending on hinge fixing
- Small cut out due to outside handle mechanism
- Innovative new and well-priced technology
- Attractive design
- Larger clearance due to narrow bending 33 x 25 mm or 37 x 25 mm
- Patented
Productopmerking:
Two different rod systems are available Rod movement is bi-directional Ⓐ = The values in the table for dimension A with seal refer to seal 1011-10. The values for dimension A are different for other seals. Ⓑ = Dimension B should have the same value as the fixing dimension of the hinge bracket if the door is to be used right or left. Dimension B depends on the hinge to be used. ① = Locking type ② = Without seal ③ = With seal ④ = Seal example: 1011-10 ⑤ = Seal and seal piece with "bulge" are not used for this assembly ⑥ = Variable rod control
Rod movement is bi-directional
Ⓐ = The values in the table for dimension A with seal refer to seal 1011-10. The values for dimension A are different for other seals.
Ⓑ = Dimension B should have the same value as the fixing dimension of the hinge bracket if the door is to be used right or left. Dimension B depends on the hinge to be used.
① = Locking type
② = Without seal
③ = With seal
④ = Seal example: 1011-10
⑤ = Seal and seal piece with "bulge" are not used for this assembly
⑥ = Variable rod control
Montageinstructie:
Attention: Locking set for ASSA cylinder, KABA cylinder and push button cannot be installed!
